Craigslist Metal Roofing (2024)

FAQs

What is the cheapest metal roof option? ›

Corrugated Metal Roofing

Corrugated steel panel roofs are the least expensive type of metal roofing, costing about $4 to $6.50 per square foot. This pricing is comparable to the price of asphalt shingle roofing. The average cost to install a 3,000 square foot corrugated steel roof would be from $12,000 to $19,500.

Asphalt shingle roofs cost homeowners between $7,225–$14,025, while metal roofs typically range from $15,000–$24,500 for a 1,700-square-foot roof.

That's because the risk of an insurance company having to cover a roof replacement due to storm damage is minimal. In fact, insurance companies cover metal roofs and often offer a discount for their installation.

Upfront costs for metal roofs are higher than most people expect and cost around $8,510 for a screw-down metal roof and $16,150 for a standing seam metal roof. Shingled roofing is significantly cheaper, although not nearly as durable. Metal roofs aren't good for coastal homes because salt can cause rust.

Metal roofing cost an average of $13,200 to install on a 1,700-square-foot roof. It is important to note that more than two-thirds of the price often goes toward materials alone. You'll pay anywhere from $1 to $25 per square foot for metal roofing materials plus another $2 to $14 per square foot for labor.

If you install a metal roof, you'll pay $38,600 and may get a $23,507 boost to home value. Therefore, you will have paid $15,093 that you may not get back in home value. If you pay $22,603 for an asphalt shingle roof, you may get a $15,392 boost to home value.

A metal roof may reduce your insurance costs.

Many insurance companies consider a metal roof to be a lower risk than traditional roofing materials such as asphalt shingles. As a result, some companies may offer discounts or lower premiums for homes with metal roofs and that should be considered into the value equation.

When rusting occurs, the oxides expand and occupy more space than the original material. Most metal roofing is made of galvanized metal or is coated to prevent rust from occurring, but ponding water or heat from direct sunlight can both wear the roof's protection away over time.

Metal roofs can dent for various reasons, including impact from hailstones, falling debris, or foot traffic during installation or maintenance. The susceptibility to denting can vary depending on the thickness and type of metal used. Softer metals like aluminum are more prone to dents than harder metals like steel.

What do you put on the edge of a metal roof? ›

By preventing water damage, a drip edge contributes to the longevity of your metal roof. It helps maintain the integrity of the roofing materials, reducing the risk of premature deterioration. In some cases, metal drip edge roofing may be required during the permitting process.

Asphalt shingles are generally the cheapest option as they are not only one of the cheapest roofing shingles but also one of the cheapest types of roof to install. Metal roofing can also be an affordable alternative as well.

If you've got a flat roof, then roofing felt is undoubtedly the cheapest due to the very low initial investment, but when performance is considered, EPDM membranes are still a highly cost-effective choice.

Installing corrugated metal roofing panels requires less of a skillset and is usually easier than standing seam. Since it's a simpler job, the installation is also less expensive on corrugated panels.

Screw Down Metal with Exposed Fasteners

This method is straightforward and easy to install, making it a popular choice for many homeowners. Let's take a closer look at the advantages and disadvantages of this installation method: Advantages of a screw-down roof: Easy to install.